Create a MAC VLAN network

Description 

 The command below is an example of creating a layer 2 macvlan network in docker. In the example below, the network I am using is 10.128.140.0/24 on interface ens160. You will have to replace the subnet and interface according to your install. 

 Conifguration 

 

 docker network create -d macvlan --subnet=10.128.140.0/24 --gateway 10.128.140.1 -o parent=ens160 L2-Connect 

 

 and this is how you add a VLAN network 

 

 docker network create -d macvlan --subnet=172.16.8.0/22 --gateway 172.16.8.1 -o parent=ens192.40 Data-40-L2-Connect 

 

 After creation of the network you can take a look to make sure it exists 

 

 root@container:~# docker network ls 

 NETWORK ID     NAME         DRIVER     SCOPE 

 01734d37ed78   L2-Connect   macvlan   local 

 310563fabcd7   bridge       bridge     local 

 4bc024cbd7cc   host         host       local 

 d2879a267450   none         null       local