Prioritize and Rate Limit

This is an example configuration showing how to apply prioritization and rate limiting on a interface level. 

 

 

 class ip any     10 match any any any class ip priority-hosts     10 match any 10.128.0.120 any     20 match any any 10.128.0.120 policy elan-in     10 class ip priority-hosts action local-priority 6     20 class ip any action local-priority 1 policy elan-out     10 class ip priority-hosts action cir kbps 20480 cbs 128 exceed drop     20 class ip any action cir kbps 286720 cbs 256 exceed drop 

 interface 1/1/27     no shutdown     mtu 9198     no routing     vlan trunk native 1280     vlan trunk allowed all     qos trust dscp     loop-protect action tx-rx-disable     apply policy elan-in in     apply policy elan-out out 

 interface 1/1/28     no shutdown     mtu 9198     no routing     vlan trunk native 1280     vlan trunk allowed all     qos trust dscp     loop-protect action tx-rx-disable     apply policy elan-in in     apply policy elan-out out